Product ID:SOFT LEAD CORRODING GRADE LEAD PURE LEAD
MSDS Date:02/01/1986
FSC:NIIN:Submitter:F BT
Status Code:A
MSDS Number: CLSDV

Emergency Phone: 612-541-1200

Info Phone: 952-476-4400/800-328-3361

Cage: 8T878

Telephone: 952-476-4400/800-328-3361

Cage: 8T878

LEAD

CAS: 7439-92-1

RTECS: OF7525000

OSHA PEL 0.05 MG/M3

ACGIH TLV: 0.15 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

Health Hazards Acute and Chronic:INHALATION: WHEN SCATTERED INT HE AIR
AS A DUST, FUME OR MIST IT MAY BE INHALED AND ABSORBED THROUGH THE
LUNGS AND UPPER RESPIRATORY TRACT IRRITATION AND IT CAN RESULT IN
BOTH ACUTE/CHRONIC OVEREXPOSU RE. INGESTION: WHEN IT GETS INTO THE
MOUTH AND IS SWALLOED IT MAY BE ABSORBED THROUGH THE DIGESTIVE
SYSTEM, AND CAN RESULT IN ACUTE/CHRONIC OVEREXPOSURE. SKIN/EYE:
DUST, FUME, OR MIST ARE NOT READILY ABSORBED THROUGH THE SKIN;
HOWEVER, THEY MAY CAUSE MECHANICAL IRRITATION TO THE SKIN. ACUTE
OVER EXPSPOSURE: IF LEFT UNTREATED: WEAKNESS, VOMITING, LOSS OF
APPETITE.
Effects of Overexposure:UNCOORDINATED BODY MOVEMENTS, CONVULSIONS,
STUPOR, BLOODY STOOLS, AND POSSIBLE COMA. CHRONIC: IF LEFT
UNTREATED: WEAKNESS, INSOMNIA, HYPERTENSION. SLIGHT IRRITATION TO
SKIN AND EYES, METALLIC TASTE IN MOUTH, ANEMIA, CONSTIPATION,
HEADACHE, MUSCLE AND JOINT PAINS, NEUROMUSCULAR DYSFUNCTION,
POSSIBLE PARALYSIS AND ENCEPHALOPATHY. LEAD AND ITS INORGANIC
COMPOUNDS ARE NEUROTOXINS WHICH MAY PRODUCE PER IPHERAL NEUROPATHY.
FOR AN OVERVIEW OF THE EFFECTS OF LEAD EXPOSURE, SEE OSHA
29CFR1910.1025, APPENDIX A.

First Aid:INHALATION: REMOVE FORM EXPOSURE. GET MEDICAL ATTENTION IF
EXPERIENCEING EFFECTS OF OVEREXPOSURE. INGESTION: GET IMMEDIATE
MEDICAL ATTENTION. EYE: FLUSH WITH LARGE QUANTITIES OF WATER. GET
IMMEDIATE M EDICAL ATTENTION. SKIN: WASH THOROUGHLY WITH SOAP AND
WATER.

Extinguishing Media:DRY CHEMICAL OR CARBON DIOXIDE SHOULD BE USED ON
SURROUNDING FIRE. DO NOT USE WATER ON FIRES WHERE MOLTEN METAL IS
PRESENT.
Fire Fighting Procedures:USE APPROVED FULL-FACEPIECE, SELF-CONTAINED
BREATHING APPARATUS AND FULL PROTECTIVE CLOTHING IF INVOLVED IN A
FIRE.
Unusual Fire/Explosion Hazard:MOLTEN METALS PRODUCE FUME, DUST, OR MIST
THAT MAY BE TOXIC.

Spill Release Procedures:DUST OR PARTICULATE SHOULD BE VACUUMED, OR WET
SWEPT WHERE VACUUMING IS INFEASIBLE. PLACE MATERIAL IN DRY, CLOSED
CONTAINERS FOR DISPOSAL OR RECYCLING. DO NOT USE COMPRESSED AIR OR
DRY SWEEPING FOR CL EANING. USE APPROVED RESPIRATORY PROTECTION IF
DUST/FUME EXPOSURE POSSIBILITY EXISTS.

Handling and Storage Precautions:STORE IN A DRY AREA WHERE ACCIDENTAL
CONTACT WITH HYDROGEN PEROXIDE IS NOT POSSIBLE.
Other Precautions:WASH HANDS, FACE, NECK, AND ARMS THOROUGHLY BEFORE
EATING OR SMOKING. EATING AND SMOKING SHOULD BE CONFINED TO
NON-CONTAMINATED AREAS. WORK CLOTHES AND EQUIPMENT SHOULD REMAIN IN
DESIGNATED AREAS, AND SHOULD NEVER BE TAKEN HOME OR LAUNDERED WITH
PERSONAL CLOTHING. DO NOT USE COMPRESSED AIR FOR BLOWI NG DUST OFF
CLOTHES.

Respiratory Protection:USE OF APPROVED (OSHA 29CFR1910.1025
(F))RESPIRATORS IS REQUIRED FOR APPLICATION WHERE ADEQUATE
VENTILATION CANNOT BE PROVIDED.
Ventilation:LOCAL EXHAUST SHALL BE PROVIDED WHERE EXPOSURES ARE ABOVE
PERMISSIBLE LIMITS OR THRESHOLD LIMIT VALUES SPECIFIED BY
OSHA/LOCAL/ST/FEDERAL REGULATIONS
Protective Gloves:GLOVES SHOULD BE WORN WHEN HANDLING THIS PRODUCT
Eye Protection:FACE SHIELDS OR VENTED GOGGLES SHOULD BY USED AROUND
MOLET METAL
Other Protective Equipment:SAFETY GLASSES SHOULD BE USED FOR OPERATIONS
GENERATING FLYING PIECES. FULL PROTECTIVE CLOTHING IS REQUIRED IF
THE PERMISSIBLE EXPOSURE LIMIT IS EXCEEDED.
Work Hygienic Practices:HARD HAT, SAFETY SHOES, AND OTHER SAFETY
EQUIPMENT SHOULD BE WORN AS APPROPRIATE FOR THE ENVIRONMENT.
Supplemental Safety and Health
RADIATION PROTECTION PRODUCTS PREVIOUSLY NAMED. NORVAL INDUSTRIES AND
AARVAL LEAD PRODUCTS. MSDS IS MOST CURRENT EDITION.

Boiling Pt:>1482.2C, 2700.F
Melt/Freeze Pt:=327.2C, 621.F
Spec Gravity:11.34
Solubility in Water:INSOLUBLE
Appearance and Odor:SILVER-GRAY METAL, ODORLESS. VARIOUS SHAPES AND
SIZES

Stability Indicator/Materials to Avoid:YES
CONTACT WITH HYDROGEN PEROXIDE MAY CAUSE A VIOLENT REACTION.
Hazardous Decomposition Products:TEMPERATURES ABOVE THE MELTING POINT
MAY PRODUCE LEAD OXIDE DUST AND/OR FUMES.

Waste Disposal Methods:MATERIAL SHOULD BE RECYCLED IF AT ALL POSSIBLE.
COLLECTION, TRANSPORTATION AND STORAGE SHOULD BE IN ACCORDANCE
W/LOCAL, STATE & FEDERAL REGULATIONS.

Toxicological Information:BIOLOGICAL LIMIT FOR LEAD: 50 MICROGRAMS
LEAD/100 GRAMS WHOLE BLOOD.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ecological:(OTHER INFORMATION CONT) CONCENTRATION, EVAPORATION,
ADDITION OF OTHER SUBSTANCES, OR OTHER MEANS MAY PRESENT HAZARDS
NOT SPECIFICALLY ADDRESSED HEREIN AND WHICH MUST BE EVALUATED BY
THE USER.

SARA Title III Information:FORMALDEHYDE SUBJECT TO REPORTING STANDARDS
OF SECTION 313 OF SARA TITLE III.